The plastic tray products produced by the injection molding method

Update:12-10-2018
Summary:

Plastic tray forming method: The first one: injection m […]

Plastic tray forming method: The first one: injection molding. The plastic tray products produced by the injection molding method are flat, smooth, crisp, compact, and have a large degree of product design freedom. They are divided into double-sided integral plastic trays and double-sided assembled plastic trays. The double-sided integral tray generally has a weight of more than 15 kg/block, and the shape is relatively complicated,plastic pallet mould requiring an injection molding machine with a clamping force of more than 2,500 tons. The trays are complex in shape, large in investment, and relatively high in cost, but due to fewer production processes, relatively high production efficiency and good product quality.

At present, there are not many methods used in general plastic processing plants. The double-sided assembled tray is divided into upper and lower two-piece trays, which are respectively assembled by injection molding. Although this product requires 2 pairs of molds, the mold structure is greatly reduced, the total investment of the mold is still cheaper than the whole type, and the requirements for the clamping force of the equipment are also reduced. The clamping force is ≥1500 tons, and the general plastic processing plants are all It's easier to do. This type of production may become the mainstream of plastic pallet production.

 Second: extrusion-hollow blow molding. The extrusion-hollow blow molding of the plastic tray is similar to the general hollow product blow molding method, and because of its large size and double-sided type, a large extruder, a mold clamping machine, and a mold are required. At present, domestic blow molding machine manufacturers have developed a large-scale hollow molding machine that specializes in high-speed production of high-strength blow molding trays. It is produced by HMWHDPE high-strength plastics. It has fast forming speed, good product quality, high strength, high rigidity and very long length. The service life of the general blow molding tray can reach 5~10 years, and it can work stably in the environment of -40~40 °C.

The dynamic load of its products can reach more than 3t, and the flexural strength reaches a high level. It is the preferred tray for long-life, high-intensity environments. It is currently more expensive than other plastic trays because of its exceptionally long service life, so its price/performance ratio is the highest among all pallets. This method will achieve rapid development in recent years as the price of molding equipment is greatly reduced. It will have a great advantage for saving limited oil resources and saving logistics costs. The third type: vacuum forming method.

The plastic trays produced by the vacuum forming method are also available in single-sided and double-sided types. Single-sided blister trays are mostly used for packaging and transportation of small motors (such as vacuum cleaner motors, power tool motors, etc.) and wire trays. Recently, they have developed rapidly and are mainly used exclusively. The double-sided blister trays are assembled in two forms: the upper half is an extruded fixed length, fixed width plastic sheet, the lower half is a large vacuum blister; the upper and lower half are large vacuum blister product. The method requires large-scale vacuum blistering equipment for production molding, the equipment cost is low, the mold cost is also low, but the product wall thickness is uneven. The fourth type: The fourth is the extrusion molding method. The plastic trays produced by this method are all assembled.